Panasonic AG-CX10 Operating Instructions Manual page 84

[FREE/REC RUN]
Sets how the time code generator advances.
[FREE RUN]
[REC RUN]
(Factory setting: [REC RUN])
@
NOTE
0 The setting is fixed to [REC RUN] when the [SYSTEM] menu → [SUPER SLOW] → [ON] is set.
0 The setting is fixed to [FREE RUN] when the [RECORDING] menu → [PRE REC] → [ON] is set.
0 The setting is fixed to [FREE RUN] when the [RECORDING] menu → [2 SLOTS FUNC.] → [BACKGR REC] is set.
0 The setting is fixed to [REC RUN] when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL] is set.
[DF/NDF]
Sets the count method for the time code generator.
Enabled only when the frame rate of the [SYSTEM] menu → [REC FORMAT] is set to 59.94i/59.94p/29.97p.
[DF]
[NDF]
(Factory setting: [DF])
@ NOTE
0 The setting is fixed to [NDF] when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL] is set.
[UB MODE]
Selects the user bits mode. User bits information is recorded in the clip.
[FRAME RATE]
[USER]
[TIME]
[DATE]
[TC]
[CLIP NAME]
(Factory setting: [USER])
[REC COUNTER]
Sets operation of the counter for recording.
[TOTAL]
[CLIP]
(Factory setting: [TOTAL])
[TIME STAMP]
Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the [DATE FORMAT] setting.
[OFF]
[DATE]
[TIME]
[DATE&TIME]
(Factory setting: [OFF])
Chapter 4 Operation — Menu settings
Advances regardless of the operation mode.
Advances only while recording.
Uses the drop frame mode.
Uses the non-drop frame mode.
Selects the image information (such as frame rate) of the camera.
Selects the user bits set in [UB PRESET].
Selects the local time. (hh, mm, ss)
Selects the local date and time. (YY, MM, DD, hh)
Records the time code value as user bits.
Records the value that CAM INDEX (one character) and CARD COUNT (3-digit number) both converted to ASCII character
code.
Only enabled when the [SYSTEM] menu → [FILE FORMAT] → [MOV] or [MP4] is set.
The count continues cumulatively until either you press the USER button assigned to [RESET] or touch the USER button icon.
Clears the counter value at the start of recording and counts the time for each recording.
Does not superimpose the date and time.
Superimposes only the date.
Superimposes only the time.
Superimposes the date and time.
- 84 -