Preparation; Instruction Manual - Kenwood NEXEDGE NX-200S Instruction Manual

INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK
1 Match the guides of the
on the upper rear of the
the battery pack in place.
2 Lock the safety catch to
prevent accidentally releasing
the battery pack.
3 To remove the battery pack,
lift the safety catch, press the
release latch, then pull the
transceiver.
Note:
For battery pack charging procedures and useage, refer to the
battery charger Instruction Manual.
Before charging a battery pack that is attached to the
While operating the transceiver using a Li-ion battery pack in
operating time may be shortened.
INSTALLING THE (OPTIONAL) ANTENNA
connector on the top of the
transceiver by holding the
antenna at its base and turning
2

PREPARATION

1
2
Optional
antenna
3