Kenwood NEXEDGE NX-200S Instruction Manual page 24

SELECTING A ZONE AND CHANNEL/GROUP ID
Select the desired zone using the key programmed as Zone
Select or Zone Up/Down
channels.
for transmitting and receiving.
ID names and number by pressing the key programmed as Display
Note: If the default settings for
and the Selector knob have been changed, use the appropriate
TRANSMITTING
1
2 Press the key programmed as Monitor or Squelch Off to
3 Press the PTT
Release the PTT
Making Group Calls (Digital) (NX-200/ NX-300 Only)
Status, you can select a group ID from the list to make a
call to those parties on a Conventional channel.
To select a group ID:
1 Press the key programmed as Group or Group + Status.
2 Press
3 Press and hold the PTT
transmission.
Group or Group +