Kenwood NEXEDGE NX-200S Instruction Manual page 25

Making Individual Calls (Digital) (NX-200/ NX-300 Only)
Individual + Status
persons.
1 Press the key programmed as Individual or
Individual + Status.
2 Press
• On keypad models, you can enter a unit ID directly.
3 Press and hold the PTT
•
transmission.
RECEIVING
Select the desired zone and channel. If signaling has been
if the received signal matches your transceiver settings.
Note:
" " on page 27 for details.
Receiving Group Calls (Digital)
When you receive a group call on a Conventional channel
and the received group ID matches the ID set up on your
transceiver, you can hear the caller's voice.
When you receive a group call on a Trunking channel, the
channel to receive the call.
Receiving Individual Calls (Digital)
the PTT
during a normal transmission.
to select a unit ID from the list.
Individual or