Kenwood NEXEDGE NX-200S Instruction Manual page 45

2
send an automatic response to the caller after
• If you are available to receive the call, press any key to
cancel the auto response.
• If there is memory available on your transceiver, "I am not
and they can leave you a recorded message. When a
appears on the display.
• If no memory is available on your transceiver, "I am not
appears on the display.
Playback (NX-200/ NX-300 Only)
To play back a recorded conversation, memo, or message:
1 Press the key programmed as Playback or access the
2 Press
• "AR" represents auto recorded conversations, "RM"
represents auto reply messages, and "VM" represents
voice memos.
3
at any time by pressing
• To delete the selected recording, press
recorded data, press and hold
.
.
. To clear all the