Kenwood NEXEDGE NX-200S Instruction Manual page 40

Vhf digital transceiver/ uhf digital transceiver

Hide thumbs Also See for NEXEDGE NX-200S:

Table of Contents

5 Press

VOX Operation

1 Connect the headset to the transceiver.

2 Press and hold the key programmed as VOX for

2 seconds.

3 To transmit, simply speak into the microphone.

•

The transceiver recognizes sound levels depending on

speaking.

5 To turn the VOX function OFF, press and hold the VOX

key again, for 2 seconds.

Note:

level, louder received signals may cause the transceiver to

transmit.

to save the setting.

Table of Contents

Nexedge nx-300 Nexedge nx-200 Nexedge nx-300s Nexedge nx-300se