Table of Contents
Advertisement
OPERATION
FRONT WINDOW
When opening or closing the ceiling window, front win-
●
dow, bottom window, or door, always set the safety lock
lever to the LOCK position.
If the control levers are not locked and they are touched
by accident, a serious accident may occur.
When opening or closing the window at the front of the
●
cab, stop the machine on horizontal ground, lower the
work equipment completely to the ground, stop the
engine, then carry out the operation.
When opening the front window, hold the grip securely
●
with both hands, pull up, and do not let go until the auto-
matic lock catch is locked.
When closing the front window, the window will move
●
quicker under its own weight. Hold the grips securely
with both hands when closing it.
It is possible to store (pull up) the front window (top) in the roof of
the operator's compartment.
When opening
1. Place the work equipment on flat ground and stop the engine.
2. Raise safety lock lever.
3. Check that the wiper blade (A) is stored in the right frame.
WARNING
CONTROL LEVERS, PEDALS
LOCK
A
UNLOCK
9JH02402AA1
121
Advertisement
Table of Contents
