Table of Contents
Advertisement
Operation
3.6
Front window
WARNING
When opening or closing the ceiling window, front window,
bottom window, or door, always set the safety lock lever to
the LOCK position.
If the control levers are not locked and they are touched by
accident, a serious accident may occur.
When opening or closing the window at the front of the cab,
stop the machine on horizontal ground, lower the work
equipment completely to the ground, stop the engine, then
carry out the operation.
When opening the front window, hold the grip securely with
both hands, pull up, and do not let go until the automatic lock
catch is locked.
When closing the front window hold the grips securely with
both hands.
It is possible to store (pull up) the front window (top) in the roof of
the operator's compartment.
When opening
1. Place the work equipment on flat ground and stop the
engine.
2. Raise safety lock lever.
3. Check that the wiper blade (A) is stored in the right frame.
WARNING
When the front window is open, there is danger that it will fall, so
always lock it with left and right lock levers (B).
PW180-7E0 – VEAM400102
Lock
Unlock
A
3.6 Front window
GK018195
3-61
Advertisement
Table of Contents
