Table of Contents
Advertisement
2.2 Precaution during operation
WARNING: For reasons of safety, always follow these safety precautions
In operator's cab
Do not leave tools or spare parts lying around in the opera-
tor's compartment. They may damage or break the control
levers or switches. Always put them in the tool box on the
undercarriage.
Keep the cab floor, controls, steps and handrails free of oil,
grease, snow, and excess dirt.
Ventilation for enclosed areas
If it is necessary to start the engine within an enclosed area, pro-
vide adequate ventilation. Exhaust fumes from the engine can
KILL.
Precautions for mirrors, windows and lights
Remove all dirt from the surface of the windows and lights to
ensure that you can see well.
Adjust the rear view mirrors so that you can see clearly from
the operator's seat, and always keep the surface of the mir-
rors clean. If any glass is broken, replace it with a new part.
Check that the head lamps and working lamps are installed
to match the operating conditions. Check also that they light
up properly.
2-12
Safety
GK018017
PW180-7E0 – VEAM400102
Advertisement
Table of Contents
