Clutch Control Accumulator (B); Brake Circuit Accumulators (C) × 3 - Komatsu PW180-7E0 Operation & Maintenance Manual

Operation
3.22.2

Clutch control accumulator (B)

This machine is equipped with an accumulator in the transmis-
sion circuit.
The accumulator is installed to the position shown in the dia-
gram on the right.
3.22.3 Brake circuit accumulators (C) × 3
This machine is equipped with accumulators in the brake cir-
cuits.
The accumulator is a device to store the pressure in the circuit,
and when it is installed, the circuit can be operated for a short
time even after the engine is stopped.
REMARK
The accumulators are installed to the position shown in the dia-
gram on the right.
Special accumulator (Italian regulations) (C) × 4 for machines
supplied to Italy four brake circuit accumulators are installed.
An additional accumulator (C) is required for machines destined
for the italian domestic market.
The additional accumulator is required to meet italian braking
regulations.
PW180-7E0 – VEAM400102
3.22 Handling accumulators
A
B
C
C
3-95