Air shroud
Removing the air shroud
Prerequisites
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
Hold the air shroud at both ends and lift it away from the system.
Figure 35. Removing the air shroud
Next steps
1. If applicable,
install the air shroud.
2. Follow the procedure listed in
Installing the air shroud
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3. If applicable, route the cables inside the system along the system wall and secure the cables by using the cable latch.
Steps
1. Align the tabs on the air shroud with the slots on the system.
86
Installing and removing system components
Safety instructions
on page 71.
Before working inside your system
After working inside your system
Safety instructions
on page 71.
Before working inside your system
on page 72.
on page 72.
on page 72.