M.2 Ssd Module; Removing The M.2 Ssd Module - Dell EMC E39S Series Installation And Service Manual

Figure 66. Installing expansion cards into the expansion riser 1A
Figure 67. Installing an expansion card into the expansion riser 2A
Next steps
1. After installing a card into the riser 1, close the PCIe card holder latch. If applicable, close the PCIe guide after installing the expansion
card.
2. Follow the procedure listed in
3. Install any device drivers required for the card as described in the documentation for the card.

M.2 SSD module

Removing the M.2 SSD module

Prerequisites
1. Follow the safety guidelines listed in
122 Installing and removing system components
After working inside your system
Safety instructions on page 71.
on page 72.