Direct Pc Connection Using Usb Cable (Windows Only) - Brother DC200 Operation Manual

: Operation performed on the machine
l
When the message [Connected to WLAN. Press
[OK] button.] appears on your LCD, press
button on your machine.
m
The Wireless LAN Connect light will turn on.
* Give the Wireless LAN Connect light time to turn
on.
: Operation performed in DesignNCut
Manager
n
Go back to your PC and then click [OK] to
complete the setup.
o
Select the machine number and then click
[OK].
Note
• To check your machine's number, press
to display the [2. Machine Info] on the
machine's LCD, and then press
When [1. No.] appears on the LCD, press
Your machine's number will be displayed on the
machine's LCD.
p
When [DesignNCut connection is successful.]
appears in the dialog box, click [OK].

After completing the network connection, see
"REGISTER DesignNCut ON ScanNCutCanvas"
on page 22 to connect your machine to
ScanNCutCanvas.
18
Direct PC Connection Using USB
Cable (Windows Only)
With a USB cable, directly connect the machine and
the computer with DesignNCut Manager
(DesignNCut application for operation options).
If you have already selected the
connection method, please go to step
: Operation performed in DesignNCut
a
Click [Start Setup].
b
Click [Connect].
c
Select [USB Cable], and then click [Next].
: Operation performed on the machine
d
Plug the USB cable connectors into the
corresponding USB ports on the computer and
on the machine.
.
.
a USB port for a computer
b USB cable
• USB Cable is sold separately.
• This connection is for Windows PC only and not
Manager
Note
available for Mac computers.
d