Brother DC200 Operation Manual page 20

e
Turn off the DesignNCut machine, by pressing
.
f
Press and the
the power comes on release
pressing down .
g
When the message [Machine mode?] appears
on your LCD, press
h
The message, [Turn the machine off, then on
again.] will appear on your LCD.
Follow the machine's instruction.
Once your machine is back on, the text [Standby
(USB)] should display on your LCD.
: Operation performed in DesignNCut
Manager
i
Go back to DesignNCut Manager and click
[Connect].
j
When [DesignNCut connection is successful.]
appears in the dialog box, click [OK].
k
Click [ScanNCutCanvas] to access to
http://ScanNCutCanvas.Brother.com to register
a new account.
l
After registering, click [Next].

All settings have been completed.
Click [How to Use] on the DesignNCut Manager
to see tutorial for the basic usage.
m
Click [Close].
at the same time, once
while still
to select [USB].
Note
• When connecting the machine and computer
with a USB cable, the AutoPlay dialog box may
appear repeatedly. To not display the dialog
box, change the AutoPlay settings as described
below.
- Windows 7
Click > [Control Panel] > [Hardware and
Sound] > [AutoPlay]. Uncheck [Use AutoPlay
for all media and devices], then click [Save]
to apply the settings.
- Windows 8.1
Move your mouse to the lower right corner
of your desktop. When the menu bar
appears, click [Settings] > [Control Panel] >
[Hardware and Sound] > [AutoPlay]. Select
[Take no action] from the [Removable drive]
drop-down list, then click [Save] to apply the
settings.
- Windows 10
Click > [Windows System] > [Control
Panel] > [Hardware and Sound] > [AutoPlay].
Select [Take no action] from the [Removable
drive] drop-down list, then click [Save] to
apply the settings.
1
19