Unit Descriptions - Operation Panel; Included Accessories - Brother DC200 Operation Manual

Unit Descriptions - Operation Panel

0
9 8 7
a LCD Panel
Displays the current settings, instructions for
performing operations and error messages.
Long messages scroll in the LCD.
b Power indicator
Lights up when the machine is turned on, and flashes
when the machine enters the sleep mode (power-
saving mode).
c Power Button
Turns the machine on/off.
d Feed Button
Feeds the loaded mat in to or out from the feed slot.
Be sure to press this button to feed the mat when
loading or unloading it.
e Pause/Stop Button
Stops cutting, drawing and other operations.
f OK Button
Applies the displayed setting or finishes the operation.
g Select Button
Display a menu or make a selection.
h Back Button
Cancels the changes made to a setting or returns to
the previous screen.
i Wireless LAN Connect Button
Used to connect to a wireless network when using the
push button method.
j Wireless LAN Connect light
Lights up when connected to a wireless network.
Memo
• For Wireless LAN Connection, once the
machine has an established wireless network
connection, the machine will automatically
reconnect to the same access point/router that
has been established. It will take about few
seconds to few minutes depending on network
environment before the wireless LAN connect
light turns on.
Please wait until the connect light turns on
without pressing any buttons on the machine.
a
2
3
4
6 5

Included Accessories

For details on the included accessories, refer to the
"Included Accessories" insertion.
1
5