Fujitsu F2 MC-16L Operation Manual page 6

■ Appearance and part names
Figure 1 shows the adapter board and gives the names of all of its parts.
(1)
(2)
No.
(1) Probe connector B
(2) Probe connector A
(3) User data bus switch
(4) Function switch
IC socket for mounting a
(5)
crystal unit oscillator
(6) Subclock setting jumper
(7) Emulator connector
IC socket for mounting an
(8)
evaluation MCU
Power supply setting
(9)
jumper
EXEC LED
HOLD LED
(10)
SLEEP LED
STOP LED
RESET LED
2
1 2 3 4 5 6 7 8
OFF
1 2 3 4 5 6 7 8
OFF
1 2 3 4 5 6 7 8
OFF
(3) (4) (5) (6)
Name
Connects to a flat cable.
Connects to a probe cable.
Used to switch the user data bus probing circuit.
Used to switch functions.
Used to mount a crystal unit.
Used to set the subclock (X0A/X1A).
Connects to the emulator unit.
Used to mount an evaluation MCU.
Used to set the evaluation MCU power supply.
Goes on when the evaluation MCU is executing a user
program.
Goes on when the evaluation MCU is in HOLD mode.
Goes on when the evaluation MCU is in SLEEP mode.
Goes on when the evaluation MCU is in STOP mode.
Goes on when the evaluation MCU is being reset.
Figure 1 Appearance of the adapter board (Top view)
(7)
(8)
Description
• Clock switch
• C-pin switch
• Emulator-dedicated power supply setting jumper
• User port power supply setting jumper
EXEC
HOLD
SLEEP
STOP
RESET
(10)
(9)