Accessories - Kenwood CS-1100 Instruction Manual

STANDARD A C C E S S O R I E S INCLUDED
Probe (PC-29)
Attenuation
Input Impedance
Instruction Manual
A C Power Cord
OPTIONAL A C C E S S O R I E S
Probe Pouch (MC-78)
Probe Holder
MOUNTING THE PROBE POUCH (MC-78)
This soft vinyl pouch attaches to the top side of the
oscilloscope housing and provides storage space for two
probes and the instruction manual. Install the probe pouch
as follows:
1 . Unsnap the probe pouch from the retainer plate.
2. Align the retainer plate with the 4 holes on the top side
of the case, with the snaps at the top.
3. Attach the four corners of the retainer plate to the
oscilloscope case with the four nylon rivets supplied.
4. Attach the probe pouch to the retainer plate using the
snap fastener.
30

ACCESSORIES

Y 8 7 - 1 2 5 0 - 0 0
1 0 MO, 18pF or less
B50-7535-20
F |
Y 8 7 - 1 6 0 0 - 0 0
J 2 1 - 2 9 0 3 - 0 3
- Grommet
nylon rivet
' Plunger
Washer
Retainer Plate
Fig. 38
INSTALUNG PROBE HOLDER
The probe holder is attached to the handle as shown in Fig.
1 / 1 0 4 1 . Install the probe holder as follows:
1. Rest the upper two claws of the probe holder on the top
surface of the handle (see inset).
9 - 1 2. Push lower claws toward handle to lock probe holder in
place.
3. Probe can now be inserted into holder.
.CAUTION:
When disengaging the probe holder from handle,
disengage lower jaw first to prevent breakage.
Handle
Probe
• Probe Holder
Probe Holder
' P u s h
Handle
Fig. 39