•
With 1 mV/div sensitivity and 100 MHz
(1 mV/div when x 5 GAIN function is used).
•
Fast
20 ns/div sweep speed (2 ns/div with
magnification).
•
Vertical sensitivity error and sweep rate error are ± 3 %
at 10 — 3 5 ° C and accurate measurements are provid-
ed.
•
The 150 mm rectangular C R T with internal graticule
provides high brightness and accurate measurements,
free of parallax error and a 16 kV accelerating potential.
•
For convenience in making rise time measurements, the
0 % , 1 0 % , 9 0 % and 1 0 0 % levels are marked on the
graticule scale of the C R T .
•
The built-in auto-focus circuit keeps the waveforms in
clear focus automatically regardless of the INTENSITY
control setting.
•
By S C A L E ILLUM control, the waveform is easy observ-
ed in darkned area and photograph of the waveform is
easy provided a single photograph of the waveform
superimposed on the graticule scale.
•
Delay sweep mode is available to observe the portion of
waveform with magnification as necessary.
•
Single sweep permits viewing and photographing one-
time events.
FEATURES
bandwidth
•
The delay line permits viewing of leading edge of high-
frequency, fast risetime pulses.
x 10
•
The VIDEO synchronization circuit permits to observe
video signal easily.
•
x 10 magnification, and alternating sweep are provid-
ed.
•
The 20 MHz bandwidth Hmiter in corporated eliminates
high-frequency, noise and stabilizes signal waveforms
displayed.
•
The dual intensity control circuit permits to vary inten-
sities separately for A and B sweeps.
•
A switching type power supply provides stable opera-
tion with varying power source (90 V ~ 2 6 4 V).
•
Provides with CH1 OUT terminal to monitor input signal
of channel 1 .
•
Selectable Auto-free
without trigger input signal.
•
Vertical MODE automatically determines the trigger
signal with V. MODE of trigger SOURCE.
•
DELAY TIME MULT control permits the accurate time
measurements with the dial scale.
•
X - Y operation is easy provided by one-touche.
run function
provides sweep
3