Page 4
a Steamer head h De-calc knob b Steamer head holder i Water tank c Hang&lock j Board cover d Pole lock clip k Board e Pole l Steam supply hose f Steam knob m Glove g Base n Brush & pleat maker a 蒸汽喷头...
Page 7
EN The board provides backing support to enhance the steaming performance. Note: Do not wash the board cover as it may damage the foam material. 熨衣板可以提供背面支撑以增强熨烫效果。 注意:不要清洗熨衣板外罩,因为这可能会损坏 海绵材料。...
Page 8
EN Your appliance has been designed to be used with tap water. In case you live in an area with hard water, fast scale build-up may occur. Therefore, it is recommended to use water without minerals such as distilled or purified water to prolong the lifetime of your appliance.
Page 10
EN Multi steam settings are provided to save water and energy. You can increase the steam setting for more steam power at any point of time. This appliance is safe to use on all fabrics at any setting. Note: The steam supply hose becomes warm during steaming.
Page 11
EN For garments which require a formal look and crisp result, such as shirts, jackets and pants, it is recommended to use the board. 对于衬衫、夹克和裤子等要求具有正式造型和挺括 效果的衣物,建议使用熨衣板。...
Page 12
EN To make crisp pleats, start steaming from the bottom half of the pants and move onto the top half to prevent accidental wrinkles on parts which have already been steamed. 要打造笔挺的裤缝,可先从裤子的下半部开始蒸汽 熨烫,然后再移至上半部进行熨烫,以防止熨烫过 的部分偶尔出现褶皱。 EN For a more natural look and quick touch-up on garments such as dresses, pleated skirts and T-shirts, it is recommanded to use the board.
Page 13
EN Put the glove on the hand you are using to hold a garment. The glove protects your hand against the steam from the steamer head. 将防烫手套戴在拿着衣物的手上。防烫手套可保护 您的手不被蒸汽喷头所喷出的蒸汽烫伤。...
Page 14
EN The brush improves steam penetration into thick and heavy fabrics for faster results. Brush slowly with the bristles touching the garment. Caution: Do not attach or detach the brush and pleat maker while the steam is on or the steamer head is hot.
Page 15
EN To maintain optimal steam performance and prolong the lifetime of the appliance, it is important to remove scale and impurities inside the appliance regularly. Therefore, it is recommended to perform the de-calc process at least once a month. Before you start de-calc process, make sure there is some water in the water tank.
Page 16
EN Note: Clean the appliance and wipe any deposits off the steamer head with a damp cloth and non-abrasive liquid cleaning agent. Always empty the water tank after usage, to prevent calc build-up and maintain good steam performance. 注意:用湿布和非腐蚀性液体清洁剂清洁本产品, 并擦去蒸汽喷头中的沉积物。 使用后务必将水箱倒空,以防止水垢的形成并保持...
Page 18
Possible cause Solution Problem The appliance The steamer has Let the appliance heat produces not heated up up for approximately no steam or sufficiently. 45 seconds. irregular steam. Steam has Lift the steamer head condensed in the to straighten the hose hose.
Page 19
Possible cause Solution Problem An excessive The water in Perform de-calc process. amount of the appliance is Refer to section. water drips out dirty or has been of the steamer left inside the head when the appliance for a appliance is long time.