Table of Contents
Advertisement
26
www.electrolux.com
Problem
Residual heat indicator
does not come on.
The oven does not heat
up.
The oven does not heat
up.
The lamp does not oper‐
ate.
Steam and condensation
settle on the food and in
the cavity of the oven.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
12. INSTALLATION
WARNING!
Refer to Safety chapters.
12.1 Technical data
Dimensions
Height
Width
Depth
Possible cause
The zone is not hot be‐
cause it operated only for a
short time.
The oven is deactivated.
The necessary settings are
not set.
The lamp is defective.
You left the dish in the
oven for too long.
847 - 867 mm
596 mm
600 mm
Remedy
If the zone operated suffi‐
ciently long to be hot,
speak to an Authorised
Service Centre.
Activate the oven.
Make sure that the settings
are correct.
Replace the lamp.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
.........................................
.........................................
.........................................
12.2 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
Advertisement
Table of Contents
