Table of Contents
Advertisement
Example: Using direct setting to set the frequency to 23. 456. 7MHz.
KEY OPERATION
FREQ key
Numeric key 2
Numeric key 3
Numeric key 5
BS key
Numeric key .
Numeric key 4
Numeric key 5
Numeric key 6
Numeric key 7
ENT key
4-1-3
STEP SETTING
In addition to the methods described in 4-1-1 and4-l-2, the STEP (FREQ) key ®
can also be used to set the frequency.
steps ( i n t e r v a l s ) .
The step value i s set during the second function mode.
1)
Press the 2nd F key ©
2)
When the FREQ (MHz) key ©
frequency display indicates the previously set step value.
3)
While the ENT key' s LED i s f l a s h i n g , use the numeric keys to enter the
desired step value.
erase the d i g i t s one by one s t a r t ing from the l a s t input.
the correct value.
4)
Select the step value u n i t .
value has been input and while the LED i s flashing, the unit becomes MHz.
I f the kHz key i s pressed instead of the ENT key, the unit becomes kHz.
The d i s p l a y changes from i n d i c a t ing the step v a l u e to showing the
FREQUENCY DISPLAY
110. 000.0
Indicates frequency
before setting
Frequency setting
stand-by
2
23
235
Wrong input
23
Input correct ion
23.
23.4
23. 45
23. 456
23. 4567
Sett ing completed
23. 456. 7
Unit setting/output
This method changes the frequency in
to enter the second function mode.
i s pressed, the ENT key' s LED flashes and the
I f a wrong d i g i t i s entered, press the BS key ©
I f the ENT key i s pressed a f t e r the step
REMARKS
Then enter
to
19
Advertisement
Table of Contents
