Table of Contents
Advertisement
4-4
ADDRESS SETTING
The MODULATION, FREQUENCY, LEVEL settings can be memorized in the addresses 0-
99.
The address setting procedure i s as follows.
4-4-1 NORMAL SETTING
Using the address sett ing keys ( A , • ) CD, increase or decrease the d i g i t s
indicat ing tens or ones in the ADDRESS display© to set the desired address.
* When s e t t ing the address, a f t e r exceeding a c e r t a i n address the d i s p l a y
may return to the previous address.
funct ion i s working.
t h i s feature i s to rotate (repeat) addresses within a certain range.
When the address rotat ion function i s working, the address sett ing procedure
i s as fol lows.
and the end address i s set to 8, the following should be done when address 9
i s memorized:
1)
Set the address d i g i t indicat ing tens to 1.
2)
Change the address d i g i t indicat ing ones from 8 to 9. Now the address
sett ing i s 19.
3)
Change the address d i g i t indicat ing tens from 1 to 0. Now the address
sett ing i s 9.
Set the address 9 using the method above or the 4-4-2 direct sett ing.
4-4-2
DIRECT SETT ING
1)
When the ADDR key ®
the LED of the ENT key ( § ) f l a s h e s .
2)
Using the numeric keys ® , enter the desired address.
3)
Press the ENT key a f t e r the address has been input.
2 8
D e t a i l s a r e e x p l a i n e d l a t e r , but the funct ion of
I f, for instances, the address rotat ion's begin address i s 0
i s pressed, the ADDRESS d i s p l a y i s c l e a r e d and
This i s because the address r o t a t i o n
Advertisement
Table of Contents
