Address Setting; Normal Setting - Kenwood SG-5110 Instruction Manual

When the AM key I s p r e s s e d once more w h i l e the key's LED l i g h t s ,
modulation I s set to OFF.
2) Select the modulation source.
To input an e x t e r n a l modulation s i g n a l , press the EXT key @,
the i n t e r n a l modulat ion s i g n a l , press e l t h e r the 1kHz key ©
400Hz key © .
4-3-4-1
Use the same procedure as for FM modulation s e t t i n g .
Refer to Section 4-3-1-1.
4-3-4-2
Use the same procedure as for FM modulation s e t t i n g .
Refer to Section 4-3-1-2.
* Input values exceeding the AM MODULATION ratings (0~60X) cannot be s e t .
The s e t t i n g resolution for both normal and direct s e t t i n g i s 0.IX.
4-3-4-3
Use the same procedure as for FM modulation s e t t i n g .
Refer to Section 4-3-1-3.
This feature makes i t easy to set AM modulation to 3 0 1
4-4

ADDRESS SETTING

The MODULATION, FREQUENCY, LEVEL settings can be memorized in the addresses 0-
99.
The address s e t t i n g procedure i s as follows.
4-4-1

NORMAL SETTING

Using the address s e t t i n g keys ( A , • ) @,
indicating tens or ones in the ADDRESS display® to set the desired address.
* When set t ing the address, a f t e r exceeding a c e r t a i n address the d i s p l a y
30
Normal Setting
Di rect Setting
Preset Setting
increase or decrease the d i g i t s
To use
or the