Table of Contents
Advertisement
* Setting I s possible within the ranges a) and b ) .
100kHz < (reference frequency - frequency deviation set value)
a)
b)
110MHz ^ (reference frequency + frequency deviation set value)
c)
Frequency deviation set value: ±10MHz Max.
* When frequency deviat ion set value once has been s e t , t h i s set value i s
added (or subtracted from) the r e f e r e n c e frequency.
that the reference frequency changes.
* Do not enter r e c a l l mode during execut ion of the A F funct ion, as the
function may not work c o r r e c t l y .
4-6-2
ADDRESS ROTATION FUNCTION
This funct ion r o t a t e s ( r e p e a t s ) addresses w i t h i n the i n t e r v a l determined by
the s e t BIGIN address and the END a d d r e s s .
according to address order and r e c a l 1 by t h i s order, so when the set address
(END) i s reached, the funct ion automat i c a l ly r e t u r n s to the f i r s t
(BIGIN).
Example : Set the r o t a t ion f u n c t ion to work i n the i n t e r v a l between
address 1 and address 15.
1)
Input ( s t o r e ) the n e c e s s a r y s e t informat ion i n addresses
from address 1 to address 15.
2)
Return to address 1.
3)
Press the 2nd F key.
4)
When the RTN/BIGIN key ©
flashes momentarily to indicate that address 1 has been set as
the BIGIN address.
5)
Set the address to 15.
6)
Press the 2nd F key.
7)
When the RCL/END key i s pressed, the address display f l a s h e s
momentarily
END address.
8)
To r e t u r n to the BIGIN address during c o n s e c u t i v e address
increment, press the RCL key.
i s pressed, the address d i s p l a y
to i n d i c a t e that address 15 has been set as the
Accordingly, note
Input the s e t informat ion
address
33
Advertisement
Table of Contents
