Table of Contents
Advertisement
* The u n i t ' s r a t i n g s a l l o w s e t t i n g w i t h i n -20 — lOOdB/z i n the case of
EMF
dB ji
and - 1 3 3 — 1 3 d B m i n the case of dBm.
exceeded,settIng becomes Impossible,
4-2-2
DIRECT SETTING
The set value can be input by using the LEVEL (dB) key @, the numeric keys
® , and the ENT key
1)
When the LEVEL key ®
display and the ENT key's LED flashes.
2)
Whi 1 e the ENT key's LED i s f l a s h i n g , use the numeric keys to enter the
desired l e v e l value.
to erase the d i g i t s one by one s t a r t ing from the last input.
the correct value.
3)
When the l e v e l value has been s e t , press the ENT key.
key i s pressed, the output l e v e l value d i s p l a y e d on the d i s p l a y i s
output.
4)
S e l e c t e i t h e r EMF dB// or dBm as output l e v e l unit by using the unit
displey selector switch @.
* I f a level value exceeding the range of the unit' s ratings i s entered, the
level display value w i l l return to the level value v a l i d before the input.
* During direct s e t t i n g , keys other than the numeric keys on the front panel
do not function.
* I f the ENT key i s not pressed a f t e r the s e t t ing and w h i l e i t s LED i s
f l a s h i n g , the set value returns to the value v a l i d before the input when
the LEVEL key ©
4-2-3
DISPLAY UNIT CHANGE
To change the l e v e l u n i t , press the d i s p l a y unit s e l e c t o r s w i t c h @.
l e v e l d i s p l a y ' s value changes according to the unit s e l e c t e d .
@.
I s pressed, d i g i t s a r e erased from the LEVEL
I f a wrong d i g i t i s entered, press the BS key ®
i s pressed again.
I f these ranges a r e
Then enter
When the ENT
The
Refer to the
23
Advertisement
Table of Contents
