Stereo Signal - Kenwood SG-5110 Instruction Manual

Resolution
Accuracy
Internal modulation frequency : 400Hz, lkHz±3X
Distortion factor
External modulation
Frequency c h a r a c t e r i s t i c
Input impedance
Input voltage
2-4 A l MODULATION
Modulation percentage
Display
Resolution
Accuracy
Internal modulation frequency : 400Hz, 1 kHz±3X
External modulation frequency : 50Hz~10kHz = ± = IdB (1kHz reference)
Distortion factor
2-5

STEREO SIGNAL

Separation
P i l o t signal frequency
Internal modulation frequency : 400Hz, lkHz±3X
Enternal modulat ion frequency : 50Hz~15kHz=±= IdB (1kHz reference)
: 0, 1kHz
: Maximum display value±10X
(RF: lMHz~110MHz
9
: 0.05% or less (RF: 10.7MHz, 76MHz~ 110MHz)
/Demodulat ion range: 50Hz — 15kHz \
AF: 1 kHz,
\75 kHz deviation: de-emphasis 50/W
: 20Hz~100kHz±ldB (1kHz reference)
(RF: 10. 7MHz, 76MHz~ 110MHz)
: Approximately lOkQ unbalanced
: Approximately 3 Vp-p
: 0 ~ 6 0 %
: 3 d i g i t s
: 0. IX
: < (display value ±5) % (RF: 100kHz~30MHz)
: 0. 5X or less (RF: 200kHz~30MHz)
/Demodulation range: 50Hz~ 15kHz
VAF: 1kHz Modulation percentage: 30%/
However, the harmonic components of
the 80MHz band i s excluded.
: Approx. 55dB (400Hz—1kHz)
: 19kHz±2Hz
(RF: 10.7MHz 76MHz~ 110MHz)
?
AF: 1kHz)
\
7