Table of Contents
Advertisement
may return to the previous address.
funct ion I s working.
this feature i s to rotate (repeat) addresses within a c e r t a i n range.
When the address rotation funct ion i s working, the address sett ing procedure
is as follows.
I f , for instances, the address rotation' s begin address i s 0
and the end address i s set to 8, the following should be done when address 9
is memorized:
1)
Set the address d i g i t indicating tens to 1.
2)
Change the address d i g i t i n d i c a t i n g ones from 8 to 9. Now the address
setting i s 19.
3)
Change the address d i g i t indicat ing tens from 1 to 0. Now the address
s e t t i n g i s 9.
Set the address 9 using the method above or the 4-4-2 direct sett ing.
4-4-2
DIRECT SETTING
1)
When the ADDR key ©
the LED of the ENT key ©
2)
Using the numeric keys @, enter the desired address.
3)
Press the ENT key a f t e r the address has been input.
Example: Setting ADDRESS 11
KEY OPERATION
ADDRESS KEY
Numeric key 1
Numeric key 2
BS key
Numeric key 1
ENT key
In the case of sequential recal 1 mode ( V i s displayed in the lower
This i s because the address r o t a t i o n
Detai Is are e x p l a i n e d l a t e r , but the funct ion of
i s pressed, the ADDRESS d i s p l a y i s c l e a r e d and
flashes.
ADDRESS DISPLAY
33
1
12
1
11
11
REMARKS
Address previous to
sett ing
ADDRESS s e t t i n g
preparat ion
Wrong input
Input correct ion
Setting completed
31
Advertisement
Table of Contents
