Installation Of Appliance; Assembling The Device; Unfolding And Folding The Scooter; Unfolding The Scooter - Beko B35010 User Manual

3

Installation of appliance

3.1 Assembling the device

Before using the scooter it is necessary to install
the handlebar on the frame main vehicle.
1. Insert the handlebar into the vehicle frame.
2. After matching the holes in the handlebar with
those of the frame, insert the screws and tight-
en them well; repeat the operation also in the
side opposite of the handlebar inserting a total
of 4 screws.

3.2 Unfolding and folding the scooter

3.2.1 Unfolding the scooter

1. Place the electric scooter on its wheels like
below.
12 / EN
2. Unlock the hook on the handlebar.
3. Pull up the handle in a gentle way. Raise the
handle slowly. Close the lock lever located on
the lower part of the handlebar support tube.
2
Electric Scooter / User Manual
1