Charging; Regarding Battery Charging; Warnings - Beko B35010 User Manual

Table of Contents

Advertisement

Available languages

Available languages

5

Charging

5.2 Regarding battery charging

The battery built in the Electric scooter is not fully
charged from production line and when left un-
used the battery can slowly discharge by itself.
This can lead to slow charge if the battery is fully
discharged, but this is done to avoid damage to
the battery.
If you experience that you cannot turn on your
E-scooter, and it doesn't seem to charge (the
charger lights up green instantly), then please do
the following.
1. Leave the charger in for 6-7 hours. This will
make sure the battery will be fully charged
again (it can take 3-4 hours before it starts
normal charging).
2. If this does not solve your problem, please ride
the Electric scooter manually without turning it
on. Use your legs to give speed, for around 100
m, and then connect the charger. The engine in
the front wheel will this way help to activate the
charging function and it will charge normally.
(fully charge takes 3 hours if using this way)

5.3 Warnings

• Using another charger may damage the product
or create other potential risks.
• Never charge the product without supervision.
• The charging period of the product should not
exceed four hours. Stop charging after four
hours.
• The product should only be charged in temper-
atures between 0°C and 45°C.
• If charging at lower or higher temperatures,
there is a risk that the performance of the bat-
tery will be reduced and a potential risk of dam-
age to the product and personal injury.
• The product should only be used in tempera-
tures between -10°C and +45°C.
• If used at lower or higher temperatures, there is
a risk that the performance of the battery will be
16 / EN
reduced and a potential risk of damage to the
product and personal injury
• Store the product at temperatures between 0°C
and 35°C. (optimum storage temperature is
25°C)
• Charge and store the product in an open, dry
area and away from flammable materials (i.e.
materials that may burst into flames).
• Do not charge the device in direct sunlight or in
the vicinity of open flames.
• Do not charge the product immediately after
use. Let the product cool down for one hour be-
fore charging.
• If the product is left with other persons for exam-
ple during a holiday period, it should be partially
charged (20-50% charged). Not fully charged.
• When shipped from the factory, the product has
often been partially charged. Keep the product
in a partially charged state, until it is going to
be use.
Electric Scooter / User Manual

Advertisement

Chapters

Table of Contents
loading

Table of Contents