Storage And Cleaning - Beko B35010 User Manual

7 Cleaning and maintenance
Make sure that all screws are properly tightened to
avoid unsafe situations. Please check the screws
regularly and tighten if they seem loose.
Brakes: Check the brake for wear at regular inter-
vals to avoid unsafe riding. Do not apply excessive
force to avoid damage to the brake.
Electric scooter with disc brake will require ad-
justment over time and in the end will need to be
replaced, when worm down. Avoid using electric
scooter when brakes are worn down, as this is un-
safe and will also damage the brake.
Wheels: Check the wheels for wear at regular in-
tervals to avoid unsafe riding.
Electric scooters come with different wheels but
can in general be separated into tires with inflata-
ble inner tubes and solid wheels.
For inflatable tires, please make sure to keep the
right pressure, as hard tires will last longer.
If the wheel seems wobbly even after screws are
tightened, the bearings might be worn down and
need replacement

7.3 Storage and cleaning

WARNING: Do not use alcohol, gas,
kerosene or other corrosive and
A
volatile chemical solvents. This can
damage both the appearance and
the internal structure of the electric
scooter
• If your Electric scooter gets dirty, please clean it
with a damp cloth only, you may not use pres-
sured water-gun or running water, as this could
damage vital parts. It is also possible to use a
little toothpaste if the dirt is stuck. Remember to
clean with damp cloth after this.
• Please make sure to keep the electric scooter
turned off while cleaning it, and make sure to
cover the charging input to avoid problems with
the electronics.
Electric Scooter / User Manual
• Make sure to dry the scooter with a towel,
should it become wet.
• Please store your Electric scooter in a dry and
cool environment when not in use. Avoid leaving
it outdoors, as it is not made for storing in wet
areas. Nor is it good to expose to high tempera-
tures caused by direct sun for a long time.
21 / EN