Fujitsu BACnet UTY-VBGX Instruction Manual page 89

BACnet ® Gateway for VRF System
8 Configuration Tool for BACnet
Introduction
The Configuration Tool for BACnet
to monitor and configure the UTY-VBGX gateway.
In order to install the software, simply execute the installer within the USB memory stick supplied with this product
and follow instructions on the wizard.
Welcome screen
From the welcome screen, access is granted to: the Fujitsu General Limited Website, start a new project, load a
previous project from our computer or get the current project running on the gateway.
1. Create New Project
When pressing this button, you will be directed to the connection view. More information can be found in 8.3
2. Load Project
Use this option to select a previous project you have been working with and it is already stored in your PC or an
accessible storage device.
3. Get Project from Device
Use this option to get the current configuration running on the gateway. Notice that to do that, you need to be
connected to the gateway.
• IP connection: This requires Ethernet connection to the gateway and also knowing the connection
password. More information about the password can be found in section 8.4.1.
USB connection: This requires USB connection to the gateway.
•
® Gateway (UTY-VBGX)
® Gateway is a Windows
Figure 8.1 Welcome screen
Copyright© 2010-2017 Fujitsu General Limited - All rights reserved
INSTRUCTION MANUAL r1.3.2 eng
® 7/ 8.1/ 10 compatible software developed specifically
89/103