Table of Contents
Advertisement
BACnet
®
Gateway for VRF System
1 Description
Introduction
This document describes the integration of Fujitsu VRF air conditioning systems into BACnet
and systems using the BACnet
The aim of this integration is to monitor and control your Fujitsu VRF air conditioning system, remotely, from your
Control Center using any commercial SCADA or monitoring software that includes a BACnet
the BACnet
®
Gateway for VRF System allows BACnet
subscription requests (COV).
The BACnet
Gateway for VRF System makes available the Fujitsu air conditioning system indoor and outdoor units
®
and its abstraction of Fujitsu air conditioning system properties and functionalities as fixed and independent BACnet
Objects.
Simple configuration is needed: just select the appropriate communication parameters.
Up to 128 indoor units supported.
This document assumes that the user is familiar with BACnet
Note: The 2 types of BACnet Gateway, UTY-ABGX and UTY-VBGX may not coexist within a VRF system.
VRF System
®
Gateway for VRF System.
Configuration
software
VRF
UTY-VBGX
Copyright© 2010-2017 Fujitsu General Limited - All rights reserved
INSTRUCTION MANUAL r1.3.2 eng
®
/IP communication, acting as a server, allowing polling or
®
and Fujitsu technologies and their technical terms.
BACnet/IP network
TCP/IP
USB
TCP/IP
®
compatible devices
®
/IP driver. To do it so,
®
9/103
Advertisement
Table of Contents
