Fujitsu BACnet UTY-VBGX Instruction Manual page 95

BACnet ® Gateway for VRF System
5. Object Instance: BACnet object instance. This can be a fixed number or a formula for the identification
of each element.
6. Units: Units applied to each object.
7. NC: Notification Class.
8. State text configuration: Enums the State text to be shown.
9. Relinquish default value: Indicates the current relinquish default value for this object.
10. COV: Sets the COV increment value for this object.
11. #: Internal gateway address for each register.
12. Device: FGL device number associated to this register.
a) Edit Columns: Enables or disables visible columns.
b) Import: Imports a previous existing configuration. Only Excel format is supported.
c) Export: Exports the current configuration. Only Excel format is supported.
d) Check table: Checks the current configuration to make sure
Receive/Send
Send or receive the current configuration of the gateway.
Figure 8.11 Send and receive options
Copyright© 2010-2017 Fujitsu General Limited - All rights reserved
INSTRUCTION MANUAL r1.3.2 eng
95/103