Table of Contents
Advertisement
EN 28
4.
TPM14.2E LA
AL
AL
ECN401
AL
KEYBOARD CONTROL
E
(1057)
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3
Assembly/Panel Removal ( for 32"/42"/47"
6500 series & 40" 6400 series & 40"/48"
6600/6700 series)
Instructions below apply to the 40PFH6609/88, but will be
similar for 32"/42"/47" 6500 series & 40" 6400 series & 40"/48"
6600/6700 series models.
4.3.1
Rear Cover
Refer to
Figure 4-29
for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1. Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set. Then remove the fixation
screws [2], [3] that secure the rear cover. Refer to
Figure 4-29
for details.
2. Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
2014-Sep-26
Mechanical Instructions
AmbiLight
(1070)
EXA04
ECN9101
CN8102
ECN602
LOUDSPEAKER
(1187)
Figure 4-28 Cable dressing (65" 7500 series)
AmbiLight
AL
(1071)
CN9101
ECN409
MAIN POWER SUPPLY
A
(1054)
ECN408
back to
div. table
AmbiLight
AL
(1070)
EXA04
RF4CE Modeul ASSY
(1076)
ECN700
ECN413
ECN1404
CN700
CN1404 CN413
SSB
B
(1053)
CN602
CN4250
ECN602
LOUDSPEAKER
(1185)
AL
AL
19614_106.eps
Hide quick links:
Advertisement
Table of Contents
