Mitsubishi Electric EcoMonitorLight EMU4-BD1-MB Manual page 34

11.Model Name/Specifications
■EcoMonitorLight Measuring Unit ■EcoMonitorLight Measuring Unit
Model Name and Specifications of EcoMonitorLight Measuring Unit
Product Name
Energy Measuring Unit
: High Performance Model
Energy Measuring Unit
: Standard Model
EcoMonitorLight Optional Equipment
Product Name
Logging unit
CC-Link communication unit
SD memory card for logging unit
Lithium battery for logging unit
Board-installation attachment
Split-type Current Sensor/Cable
Product Name
Split-type current sensor
5A current sensor cable
Extension cable (standard type)
Extension cable (separate type)
*1: If measuring a high-voltage circuit or using an already installed CT, configuration is two-step with a 5A split current sensor connected to the secondary side of the CT (*/5 A).
33
Unit
Measures various energy items (such as current, voltage, power, power use and harmonics).
EMU4-HD1-MB Standard-equipped with MODBUS
Compatible with three-phase 4-wire.
Measures various energy items (such as current, voltage, power and electric energy).
EMU4-BD1-MB
Standard-equipped with MODBUS
Unit
EMU4-LM
Saves measurement data of the main unit of the energy measuring unit for a certain period of time. Outputs to SD memory card in CSV format.
EMU4-CM-C
Connects the main unit of the energy measuring unit with CC-Link communication.
EMU4-SD2GB
SD memory card for use with a logging unit. Periodically saves data output from the logging unit.
EMU4-BT
Backup battery of a logging unit.
EMU4-PAT
Attachment for installing to the board of a measuring unit, Used to cover the fixing screws when installing to a board.
Unit
EMU-CT50
50A (Only for low voltage)
EMU-CT100
100A (Only for low voltage)
EMU-CT250
250A (Only for low voltage)
EMU-CT400
400A (Only for low voltage)
EMU-CT600
600A (Only for low voltage)
EMU2-CT5
5A*1 (Only for low voltage)
EMU2-CT5-4W
5A*1 (High and low voltage for the secondary side for 5A CT, three-phase 4-wire)
EMU2-CB-Q5B Used if connecting EMU2-CT5-4W and EcoMonitorLight.
EMU2-CB-Q5B-4W three-phase 4-wire
EMU2-CB-T1M
EMU2-CB-T5M
Used if extending EMU2-CT5 (-4W) and EMU2-CB-Q5B (-4W).
EMU2-CB-T10M
EMU2-CB-T1MS
Used if extending the split CT of an EMU2-CT5 (-4W) and split sections, or if extending the cable
EMU2-CB-T5MS
between an EMU2-CT5-4W and the main unit of an energy measuring unit.
EMU2-CB-T10MS
Specifications
RTU (RS485), Pulse and Contact input and output,
®
RTU (RS485).
®
Specifications
Specifications