Motorola AltiVec MVME5100 Series Installation & Use Manual page 36

8. Delays for 750 milliseconds.
9. Determines the CPU base board type.
10. Sizes the local read/write memory (i.e., DRAM).
11. Initializes the read/write memory controller. Sets base address of
12. Retrieves the speed of read/write memory.
13. Initializes the read/write memory controller with the speed of
14. Retrieves the speed of read only memory (i.e., Flash).
15. Initializes the read only memory controller with the speed of read
16. Enables the MPU's instruction cache.
17. Copies the MPU's exception vector table from 0xFFF00000 to
18. Verifies MPU type.
19. Enables the superscalar feature of the MPU (superscalar processor
20. Verifies the external bus clock speed of the MPU.
21. Determines the debugger's console/host ports and initializes the
22. Displays the debugger's copyright message.
23. Displays any hardware initialization errors that may have occurred.
24. Checksums the debugger object and displays a warning message if
25. Displays the amount of local read/write memory found.
http://www.motorola.com/computer/literature
memory to 0x00000000.
read/write memory.
only memory.
0x00000000.
boards only).
PC16550A.
the checksum failed to verify.
Using PPCBug
3
3-5