Wall-Mounted Installation - Huawei SUN2000-50KTL-ZHM3 User Manual

SUN2000-(50KTL-ZHM3, 50KTL-M3)
User Manual
----End

4.5.2 Wall-mounted Installation

Prerequisites
To install the SUN2000, you need to prepare expansion bolts. M12x60 stainless
steel expansion bolts are recommended.
Procedure
Step 1 Determine the positions for drilling holes and mark the positions using a marker.
Step 2 Secure the mounting bracket.
Avoid drilling holes in the water pipes and cables buried in the wall.
Figure 4-12 Expansion bolt composition
(1) Bolt
(4) Flat washer
● To prevent dust inhalation or contact with eyes, wear safety goggles and an
● Clean up any dust in and around the holes using a vacuum cleaner and
● Level the front of the expansion sleeve with the concrete wall after removing
Issue 03 (2022-08-30)
NO TE
You are advised to apply anti-rust paint on the hole positions for protection.
D ANGER
NO TICE
anti-dust mask when drilling holes.
measure the distance between holes. If the holes are inaccurately positioned,
drill holes again.
the bolt, spring washer, and flat washer. Otherwise, the mounting bracket will
not be securely installed on the concrete wall.
Copyright © Huawei Technologies Co., Ltd.
(2) Nut
(5) Expansion sleeve
4 Installation
(3) Spring washer
24