Siemens SINAMICS S120 Equipment Manual page 69

Line connection
The smart line module is rated for a voltage range from 380 V 3AC -10% to
480 V 3AC +10% (-15% <1 min) at 47 Hz to 63 Hz.
Table 3-7
Terminals
Line connection
Smart line modules
5 kW and 10 KW
1) For ring cable lugs to DIN 46234
X21 terminals: Smart line module
Table 3-8 Terminal block X21
Terminal
1
2
3
4
Max. connectable cross-section: 1.5 mm
X22 terminals: Smart line module
Table 3-9 Terminal block X22
Terminal
1
2
3
4
Max. connectable cross-section: 1.5 mm
Booksize Power Sections
Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0
Connection methods for the smart line module
Designation
Ready
Pre Warning
Enable Pulses
Enable Pulses Ground
2
Designation
24 V power supply
Disable generation
Reset
Ground
2
3.3 Smart line module booksize internal air cooling
Designations
1)
X1 (U1, V1, W1)
Screw terminal 6 mm2 3–pin/0.8 Nm
(see Connection methods)
Threaded hole for PE: M5/3 Nm
Technical specifications
Checkback: Smart line module ready
Prewarning threshold overtemperature / I x t
Technical specifications
Electronics power supply
Feedback deactivated
Reset faults (positive edge)
Electronic ground
Line Modules Booksize
1)
3-21