[ X Troubleshooting ]
(4) Unscrew the five screws, and remove the compressor
cover F.
(5) Unscrew the three screws, and remove the compressor
cover T.
(6) Remove the four screws, two saddles, silicon rubber
spacer, packing, two tie bands, and discharge pipe cover.
(7) Remove the two tie bands holding the pipe cover, and take
the thermistor out of the thermistor holder.
HWE22020
Screws (5 places)
Compressor cover F
Packing
Tie bands (2 places)
Tie bands (2 places)
- 160 -
Compressor cover T
Screws (3 places)
Screws (4 places)
Saddle
Silicone rubber spacer
Pipe cover
Thermistor (2 places)
GB