Mitsubishi Electric CAHV-R450YA-HPB Service Manual page 173

[ X Troubleshooting ]
(5) Cut the two tie bands, and take the thermistor out of the
thermistor holder.
(6) Insert the thermistor into the thermistor holder.
(Tape with green at the bottom (TH10))
(7) Hold the thermistor holder and the thermistor wire together
with tie bands.
(Fold the thermistor wire to keep the sensor wire from
coming out.
Insert the thermistor until the identification tape has
reached the entrance to the thermistor holder.)
(8) Reinstall the removed parts back in place to complete the
procedure.
HWE22020
Thermistor holder
Thermistor holder
- 164 -
Tie bands (2 places)
Tape with green at the bottom
Tie bands (2 places)
Identification tape
Fold the thermistor wire,
and hold it in place.
GB