[ X Troubleshooting ]
(8) Disconnect the three wires from the terminal screws of the
compressor.
(9) Recover the refrigerant through the high-pressure and
low-pressure check joints.
(10) Unscrew the screw, and remove the pipe
fixing plate of the coil.
(11) Remove the nuts SP and the three double-shaft bolts.
(Removing the bolts allows the compressor to be pulled out
without being lifted.)
HWE22020
Nut SP (3 places)
- 161 -
Screws (3 places)
Check joint
Pipe fixing plate
Screw
Double-shaft bolt (3 places)
GB