78K0R - Cool it!
In case of a security ID mismatch the following message box is displayed by the IAR C-SPY debugger. Click
the YES button to enter the Hardware Setup menu.
Specify the default security ID <1> - the default security ID of an erased flash is equal to 10bytes 0xFF each
-and enable the "erase flash before next ID check" option <2>. Then press the OK button <3> to start flash
erasing and to establish the debugging session.
<1> specify default
security ID
<2> enable erase flash
before next
ID check
The progress of flash erasing is indicated by blue dots in the TK-78 Emulator window. Following the
debugger starts downloading the executable to the 78K0R – Cool it! board like shown in figure 28.
Click
Figure 30: TK-78 enter Hardware Setup
Figure 31: TK-78 Hardware Setup menu
Figure 32: TK-78 flash erasing
User's Manual U18426EE1V0UM00
<3> Click
43