Siemens SITRANS LG260 Operating Instructions Manual page 35

Lock/unlock setup - Ad-
justment
Setup - Current output 2
Display
Display - Menu language
PBD-51041057
In the menu item "Lock/unlock adjustment", you can protect the sen-
sor parameters against unauthorized or inadvertent modification. The
PIN is activated/deactivated permanently.
With active PIN, only the following adjustment functions are possible
without entering a PIN:
•
Select menu items and show data
•
Read data from the sensor into the display and adjustment mod-
ule.
Caution:
With active PIN, adjustment via PACTware/DTM as well as other
systems is also blocked.
You can change the PIN number under "Additional settings - PIN".
If a supplementary electronics with an additional current output is in-
stalled in the instrument, you can adjust the additional current output
separately.
In menu item"Current output 2" you specify which measured value
the additional current output refers to.
The procedure corresponds to the previous settings of the standard
current output. See "Setup - Current output".
In the main menu point "Display", the individual submenu points
should be selected subsequently and provided with the correct
parameters to ensure the optimum adjustment of the display options.
The procedure is described in the following.
The following submenu points are available:
The submenu points described below.
This menu item enables the setting of the requested national lan-
guage.
In the delivery status, the sensor is set to the ordered national lan-
guage.
SITRANS LG260 - Operating Instructions
35