Pre-Warning - Panasonic Web-server II Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
4.4.3
Operating Instructions Web512 V2.6.x for Web-server II 1598
001-01
The Time (date & time), Zone – Address and Text (alarm text) are
displayed.
Source = Smoke, Heat, Multi, MCP, Exting. system or Other.
State = Heavy smoke / heat, Test, Isolated and Alert Annunciation
alarm acknowledged / not acknowledged.
– see below)
Info: A hyperlink to open a document, a drawing etc. for more
information regarding the alarm point.
Camera: A hyperlink to a web camera.
Click Reset to reset the fire alarm respectively. (Require log-in on
User level 3 or higher.)
Click Reset All to reset all fire alarms. (Require log-in on User
level 3 or higher.)
If the list is "full" click Next to see the next list and Prev to see
previous list.
NOTE!
Ack (to the left of Reset All) can only be used when an Alert
Annunciation alarm is activated. Click Ack to acknowledge the Alert
Annunciation alarm.

Pre-warning

In case of a pre-warning (Value > 0 and yellow indication), click Pre-
warning or to view the Pre-warning Alarm view / list.
List
The Time (date & time), Zone – Address and Text (alarm text) are
displayed.
Source = Smoke, Heat, Multi or Other.
3
In Australian convention also Acknowledged alarm.
3
(Alert Annunciation alarm
14