Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
6
Operating Instructions Web512 V2.6.x for Web-server II 1598
Site download to Web-server II
To download a site to the Web-server II, the PC (Web512 II Config
Tool V2.6.x) and the Web-server II both have to be connected to a
Local Area Network (LAN)
select the site to be downloaded, see page 42.
If gateway type "Tateco " is to be used, also a Tateco configuration
file has to be selected, see page 51.
In the tab Sites click Download and this dialog box opens:
A User name and a Password for FTP login are required before the
download can start.
Click Download. During the download information will be shown in
the field below.
When the download is ready the Web-server II has to be restarted, i.e.
turn off the power supply and then turn on the power supply again.
After restart (and in case of inconsistency between the Web-server II
and the EBL512 system), the Web-server II database should be
updated, i.e. a synchronization has to be done via EBL512 (menu
H8/S10) or via the Web-server II, see page 34.
After restart the Web-server II clock should be set, see chapter "Set
Calendar and Time", page 30.
44.
8
As an alternative the PC can be connected directly to the Web-server II via
a crossed network cable or a hub.
9
The clock is also set automatically once a day at midnight. Also menu H3
in EBL512 can be used and the command will then be sent when you leave
menu H3 by pressing "Accept", see EBL512 Operating Instruction.
8
. In the Web512 II Config Tool V2.6.x,
9
See also chapter "NTP Server", page
60
Advertisement
Table of Contents
