Table of Contents
Advertisement
5.3
Cable gland
General procedure
The leads are generally connected as follows:
1. Unscrew the cover and place it next to the device.
2. Loosen the cable gland.
3. Remove the sealing stopper.
4. Connect the desired lead.
5. Tighten the cable gland.
Arrangement of cable glands
①
②
③
④
⑤
⑥
⑦
Figure 5-2
See also
Connecting PROFIBUS DP (Page 33)
SITRANS DA400 for oscillating positive displacement pumps
Operating Instructions, 09/2008, A5E00841120-03
Cable gland for digital outputs "DO 1" to "DO 6"
Cable gland for signal inputs "In 1" and "In 3"
Cable gland for signal inputs "In 2" and "In 4"
Cable gland for PROFIBUS
Cable gland for sensors 2 and 4
Cable gland for sensors 1 and 3
Cable gland for power supply L+ and L- and earthing
Arrangement of cable gland
Connecting
5.3 Cable gland
29
Advertisement
Table of Contents
