Siemens Maxum Edition II Installation Manual page 24

Installation Steps
3.5 Cable Connections
External DC Power Connections
When the analyzer is powered by an external 24 VDC source, the cables are connected to a
terminal block on the upper-left part of the back wall of the electronics enclosure as shown
below.
Figure 3-9
External AC Power Connections
When the analyzer is powered by an external AC source, the cables are connected to a terminal
block on the lower-front part of the left wall of the electronics enclosure as shown below.
Figure 3-10
See the
connection of external power to the 24V power supply.
24
MMO 24VDC Power Entry Connection
MMO AC Power Entry Connection
Maxum II Installation Manual 2000595-001 for information regarding proper
Installation Manual
Installation Manual, 12/2019, 2000595 Rev 1