Dismantling
WArNING! rISK oF INjUry!
►
Always disconnect the appliance from the
power supply before dismantling the attach
ment .
1) Remove the filler bowl 2 .
2) Push the small button next to the feed tube 3
on the food processor and, at the same time,
turn the attachment to the side and pull it off
the food processor .
Cleaning and care
WArNING! rISK oF INjUry!
►
Be careful when cleaning the mincing knife q!
It has sharp edges .
ATTENTION! PrOPErTy dAmAgE!
►
Do not use aggressive, abrasive or chemical
cleaning agents . These may damage the
surfaces .
►
Do not clean the components of this attach
ment in a dishwasher! This can cause dam
age to the attachment components .
1) Clean all parts in warm water with a little mild
detergent .
2) Rinse all the parts off using clean water to
remove any remaining detergent residues .
3) Dry everything properly .
NOTE
►
After cleaning, rub a little cooking oil into the
metal parts . Otherwise, the metal parts could
become discoloured .
SKV 1200 A1 - C
Storage
Store all parts of the meat grinder attachment in a
clean, dry location .
You can also keep the perforated discs 9/0 in
the pusher 7 for storage .
Disposal
Dispose of the attachment in an environmentally
friendly manner .
The packaging is made from environ
mentally friendly material and can be
disposed of at your local recycling plant .
GB │ MT
│
29
■