Battery Reuse Preparation - Lenovo motorola moto g Service Manual

Battery Reuse Preparation

/// WARNING ///
Failure to adhere to Safety Critical Note(s) may increase
risk of rupture, burning, or failure to function safely when
used by the customer. Refer to the Battery Safety
Guidelines.
1. If the Battery is not creased or bent beyond 30
degrees, use a large, flat block to press the
Battery against a table top.
2. If the Battery foil pack is wrinkled, slide the flat
edge of the Black stick against the foil pack to
smooth it.
PAGE 37
// CAUTION //
Handle the Battery Pack with care. If dropped to the
floor, it may be internally damaged and must be
scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and throughout
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.
01/20/2015
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola