Battery Assembly - Lenovo motorola moto g Service Manual

Battery Assembly

/// WARNING ///
Failure to adhere to Safety Critical Note(s) may increase
risk of rupture, burning, or failure to function safely when
used by the customer. Refer to the Battery Safety
Guidelines.
1. Clean the battery cave of front housing ASSY
And put 2 battery adhesives in assembly.
2. Tear off two pcs battery adhesive liner. Battery
tape shown as in the figure.
// CAUTION //
Ensure Battery and its insulation are not
damaged (e.g. scratched, dented, punctured)
prior to and throughout assembly.
PAGE 51
// CAUTION //
Handle the Battery Pack with care. If dropped to the
floor, it may be internally damaged and must be
scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and throughout
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.
01/20/2015
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola